Wheels
| Size · hardness | Good for | From |
|---|---|---|
| 52 mm · 99A | Street, small parks | $55 |
| 54 mm · 99A | Bowls, bigger riders | $60 |
| 56 mm · 78A | Cruising, rough paths | $65 |
Hard wheels slide; soft wheels grip and roll over bluestone laneways and tram tracks.
Brunswick · Melbourne · rider-run
Roll in. Build a deck. Go find a kerb.
A skate shop on the north side with decks, wheels, trucks and completes on the wall, Saturday lessons for first-timers, and honest advice on where to skate this arvo. Design your own deck below and spin it in 3D.
- Custom decks pressed & printed in-shop
- Free set-up with every complete
- Open 6 days
Deck lab
Design it. Spin it.
Pick a shape, a stencil, colours and grip tape, then drag the deck to spin it — or focus it and use your arrow keys. Every custom deck is seven-ply maple, printed and gripped in the shop.
Graphic sideYour build$0sample price
Drag to spin · ← → rotate · ↑ ↓ tilt
On the wall
Decks
Shop decks in the widths people actually ride, a cruiser for cracked footpaths and one wide old-school shape for bowl days. Tap “Customise” to load any of them into the deck lab.
Sample prices, deck only. Grip tape is free with any deck — we’ll lay it while you wait.
Parts
Wheels & trucks
Trucks
| Deck width | Axle | Pair |
|---|---|---|
| 7.5–8.0″ | 129 mm | $89 |
| 8.0–8.5″ | 139 mm | $89 |
| 8.5–9.0″ | 149 mm | $95 |
| 9.0″ and up | 159 mm | $99 |
Match the axle to your deck width so the wheels sit flush with the edges.
Bearings & bits
| Bearings, set of eight | $25 |
| Hardware, 1″ bolts | $6 |
| Risers, 1/8″ | $8 |
| Grip sheet | $12 |
| Bearing clean & lube | $15 |
Sample prices. Bring your board in and we’ll check it over while you wait.
Ready to roll
Complete setups
First push
For first boards and riders aged 8 and up.
- 7.75″ popsicle shop deck
- 129 mm trucks, 52 mm 99A wheels
- Bearings, hardware and black grip
$169sample
Street
For parks, ledges and the odd kerb.
- 8.25″ popsicle shop deck
- 139 mm trucks, 53 mm 99A wheels
- Bearings, hardware and black grip
$219sample
Cruiser
For getting across town, not down stairs.
- 8.75″ cruiser deck
- 149 mm trucks, 56 mm 78A soft wheels
- Risers, bearings, hardware and grip
$239sample
Every complete is set up and tuned in the shop, with a free bearing check after four weeks.
Local knowledge
Where to skate
Stylised — not to scale
Check local signs — some plazas don’t allow skating, and most parks close at dusk.
Weekend mornings
Lessons
Groups of six at a council skate park in Brunswick — we text the exact spot the day before. Boards, helmets and pads are included.
First push · ages 7–12
Sat 9–10am · $35 per session (sample). Standing, pushing, stopping and falling safely.
Basics · teens & adults
Sat 10.30–11.30am · $40 (sample). Carving, tic-tacs and your first kick-turn.
Bowl basics · ages 10+
Sun 9–10.30am · $50 (sample). Pumping, rock to fakie, and dropping in when you’re ready.
Private coaching
By arrangement · $70 an hour (sample). One rider, your goals.
Visit
Come say g’day
Hours
| Mon | Closed |
| Tue–Fri | 11am–7pm |
| Sat | 9am–5pm |
| Sun | 10am–4pm |
Find us
- Brunswick, Melbourne VIC
- Close to the tram and the bike path
- (03) 5550 7316
- 0491 570 158 — texts about lessons
- crew@example.com
In the workshop
- Board set-up while you wait — $10
- Grip job, any deck — $10
- Bearing clean & lube — $15
- Free set-up with any complete
Sample prices.